Welcome EB-3360E Handbuch Seite 21

the aftersales service or the shop you purchased the
appliance at . Original spare parts should be used only.
3
When the power cord is damaged, it must be replaced by
(6)
the manufacturer or an authorised customer service or a
qualified professional only.
Never touch power plugs, power switches or other
(7)
electrical components with wet or damp hands. RISK OF
ELECTRIC SHOCK!
WARNING!
Operate the appliance with 220 ~ 240 V AC / 50 Hz only.
(1)
Disconnect the appliance from the mains before you clean or
(2)
maintain it.
The technical data of your energy supply must meet the data
(3)
on the rating label. The main current circuit must be equipped
with a safety shut-down device.
The appliance must always be grounded and protected
(4)
corresponding to the requirements of your local energy
supplier. The main current circuit must be equipped with a
safety shut-down device.
Depending on model.
3
All modifications to the electrical mains to enable the
(5)
installation of the appliance must be performed by a qualified
professional.
In case of an event caused by a technical malfunction,
(6)
disconnect the appliance from the mains.
Do not use adapters, multiple sockets and extension cords for
(7)
connecting the appliance to the mains.
Do not carry out any modifications to your appliance.
(8)
The room the appliance is installed in must be dry and well-
(9)
ventilated. When the appliance is installed, an easy access to
all control elements is required.
The veneering of cabinets has to be fixed with a heat-
(10)
resistant glue, that is able to withstand a temperature of 120
C.
0
Adjacent furniture or housing and all materials used for
(11)
installation must be able to resist a temperature of min. 85
C above the ambient temperature of the room the appliance
0
is installed in during operation.
Remove the back of the kitchen unit to ensure adequate
(12)
ventilation around the appliance. The appliance must have at
least 45 mm of free space at its back.
21