Assembly Instructions - MAXOfit MF-27 Bedienungsanleitung

3. Assembly instructions

The treadmill is already delivered pre-assembled. You just have to tighten the screws
for the handrail.
Proceed as follows:
1. Lay the treadmill on the floor.
2. Tighten all screws on the handrail. Then check the function of the handrail by
opening it.
3. The treadmill is ready for use.
The treadmill has been lubricated in the factory, for more information on tread
lubrication, see section 7.3 Lubricating the treadmill.
4