Chauvet DJ COREpar UV120 ILS Schnellanleitung Seite 5

D-Fi USB Connectivity
The COREpar UV120 ILS is able to become a D-Fi wireless receiver/transmitter with the use of the D-Fi USB from
CHAUVET DJ. Simply set the DIP switch D-Fi receiving/transmitting channel, plug it into the USB port then set the
product's DMX Personality and DMX Address. Further instructions for connecting and configuring this product for D-Fi
USB operation are in the User Manual.
WARNING! DO NOT plug anything other than a D-Fi USB into the USB port. Doing so may cause
damage to the product.
Once plugged in, the D-Fi USB will take over the product. Wired DMX and manual display control/menu
buttons will be unavailable until you unplug the D-Fi USB. The priority levels are:
1. D-Fi USB
2. Wired DMX
3. IRC-6 Remote Control
4. Manual Digital Display/Menu Buttons
DMX Values
1-Ch 5-Ch Function
1 1 UV
Strobe
(When CH3 is 000-031)
Program Speed
– 2
(When CH3 is 032-223)
Sound Sensitivity
(When CH3 is 224-255)
– 3 Programs
– 4 Dimmer
– 5 Dimmer Speed
COREpar UV120 ILS QRG Rev. 2
QUICK REFERENCE GUIDE
Value Percent/Setting
000  255 0–100%
000  015 No function
016  255 Slow to fast
000  255 Slow to fast
000  010 No function
011  255 low to high sensitivity
000  031 No function
032  095 Pulse effect 0-100%
096 159 Pulse effect 100%-0
160  223 100%-0-100%
224  240 Sound sensitivity 1
241  255 Sound sensitivity 2
000  255 0–100%
000  051 Dimmer speed set from menu options
052  101 Dimmer speed mode off
102  152 Dimmer speed fast
153  203 Dimmer speed medium
204  255 Dimmer speed slow
EN
4