Operation; Hot Laminating Operation - Titanium Vision G60 Bedienungsanleitung

6. Operation

Hot laminating operation:

1) Turn on the Power switch, and press the
On/Off button.
3)When READy light turns green, and you
hear the beeping sound, the machine is
ready to start laminating.
5) Remove finished lamination from
Pouch exit tray at the back of the
machine.
7) Turning off the machine - Press the On/
Off button, and turn off the Power switch.
26
2) Select the job by pressing the right
button: DOCUMENT/PHOTO /COLD
button.
4)Place the pouch(proper document
inside) into the Pouch entry tray, sealed
edge first.
6)In case of pouch jam, press the REVERSE
button. Pull out the jammed lamination
from the Pouch entry tray. Alternatively
the machine will find out the jam itself
and reverse by itself.
8) Connect your device with the USB
power charger. The machine can
support both Android and IOS system.
Vision G60