Herunterladen Inhalt Inhalt Diese Seite drucken

Autel EVO Nano-Serie Bedienungsanleitung Seite 21

Vorschau ausblenden Andere Handbücher für EVO Nano-Serie:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

• Low power protection.If the battery is low, it will automatically
enter sleep mode to prevent over-discharge. In this mode, the
battery does not respond when the power button is pressed.
To wake up the battery, connect it to the charger.
• Charging temperature detection.If the temperature is below
5℃(41℉) or above 45℃(113℉) when charging, the battery will
stop charging.
• Overcurrent protection.When the charging current is too high,
the battery will stop charging.
• Overcharge protection.Charging will stop automatically when
the battery is fully charged.
• Balance protection.The voltage of each battery cell is balanced
to prevent overcharging or over-discharging.
• Over-discharge protection.When the battery is not in use, it
will automatically disconnect the power output function after
the self-discharge cycle is completed. This function is disabled
during flight.
• Short circuit protection.Once a short circuit is detected, the
power will be cut off.
• Power saving mode.If there is no operation for 30 minutes, the
battery will turn off.
• Communication.When in use, the vehicle is continuously
synchronized with the battery to provide real-time information,
including voltage, capacity, current, temperature, etc.
• Ultra-low energy mode. If the battery level falls below about
8%, the battery will enter ultra-low power mode to reduce
self-consumption of electricity. When the battery enters
ultra-low power consumption to recover, it needs to be
activated by the charger before it can continue to be used
normally.
19

Werbung

Inhaltsverzeichnis
loading

Verwandte Produkte für Autel EVO Nano-Serie

Inhaltsverzeichnis