Additional Features - Autel EVO Nano-Serie Bedienungsanleitung

Turn off the battery
Press and hold the power button for 3 seconds to turn off the battery.
If batteries are installed in the craft, LED1 and LED4 will blink 5 times
to indicate that the power is being turned off. Once all battery level
indicators are off, remove the batteries from the craft.
Check the battery level
With the battery off, press the power button for 1 second, then quickly
release it to check the battery level. The LED will show the current
battery level as follows:
Battery level indicator status (non-charging state)
0%~12%
51%~62%
-Green light is always on

Additional Features

The following features protect and extend battery life.
• Storage self-discharge protection.If the battery is stored in a
hot environment or not used for 6 days and the charge level
is high, the self-discharge protection will be activated. The
battery will be automatically discharged to a safe level. This is
the default setting, and the discharge process takes 2-3 days.
Although the battery does not indicate during the self-discharge
cycle, you may notice a slight warming of the battery, which is
normal.
13%~25%
63%~75%
- Green light flashing
18
26%~37%
76%~87%
38%~50%
88%~100%
- Close