Betriebsanleitung MODSTER SC R1 EINLEITUNG Vielen Dank, dass Sie unser elektrisches Skateboard gekauft haben. Bitte beachten Sie, dass ein elektrisches Skateboard kein Spielzeug ist. Bitte nehmen Sie sich Zeit und lesen dieses Handbuch sorgfältig durch, insbesondere die Seiten mit den Sicherheitshinweisen.
Betriebsanleitung MODSTER SC R1 ANWEISUNG ZUR KOPPLUNG Im ersten Schritt müssen das Board und die Fernsteuerung verbunden werden. Bevor Sie beginnen, stellen Sie sicher, dass das Board und die Fernbedienung ausgeschaltet sind. 1. Schalten Sie das Board 2. Drücken Sie die Einschalttaste 5 Sekunden lang, bis das Licht der Einschalttaste zu blinken beginnt.
Betriebsanleitung MODSTER SC R1 SPEZIFIKATIONEN Reichweite bis zu 8 km Niedrig bis zu 10 km/h Leistung Mittel bis zu 15 km/h Maximal bis zu 20 km/h Nettogewicht 3,75 kg Größe 680 x 190 x 120 mm Gesamtes Board maximales Belastungsgewicht...
Betriebsanleitung MODSTER SC R1 SICHERHEITSHINWEISE Das E-Skateboard ist kein Spielzeug und sollte mit entsprechender Vorsicht behandelt werden. Sicherheit, steht immer an erster Stelle, da es möglich ist, das Gleichgewicht zu verlieren und einen Aufprall oder Sturz zu erleiden. Achten Sie darauf, dass Sie das Board in einer sicheren und angemessenen Umgebung benutzen und tragen Sie immer eine geeignete Sicherheitsausrüstung.
Betriebsanleitung MODSTER SC R1 AKKU-SICHERHEIT Lithium -Akkus können bei unsachgemäßer Behandlung explodieren oder ein Feuer verursachen Bitte behandeln Sie die Akkus Ihres Skateboards wie folgt: • Prüfen Sie vor jedem Ladevorgang und jeder Fahrt den Akku und Ladeanschluss auf mechanische Beschädigung.
Betriebsanleitung MODSTER SC R1 GEWÄHRLEISTUNGSAUSCHLUSS • Das maximale Gesamtgewicht und sowie die maximale Belastung dürfen nicht überschritten werden. Hohe Belastung in Verbindung mit überlastender Bedienung des Gerätes kann zu strukturellen Schäden führen. • Springen mit dem Gerät ist nicht erlaubt und führt zu Gewährleistungsverlust, ebenso das Durchfahren von Schlaglöchern und Ähnlichem.
Seite 11
Betriebsanleitung MODSTER SC R1 www.modster.at...
Seite 12
User Manual MODSTER SC R1 CONTENT Introduction....................................13 Preparation....................................13 Parts Diagram....................................14 Remote Control....................................15 Pair instruction.....................................16 Specification....................................17 Safety instructions..................................18 Battery Safety Instructions................................19 Disclaimer of Warranty................................20 Declaration of Conformity.................................21 www.modster.at...
User Manual MODSTER SC R1 INTRODUCTION Thank you for purchasing our electric skateboard. Please note that an electric skateboard is not a toy. Please take your time to learn how to use it & read this manual carefully, especially the safety instructions.
User Manual MODSTER SC R1 PARTS DIAGRAM Front truck Deck Battery case Hub motor Battery Controller Charge port Battery indicator Power button www.modster.at...
User Manual MODSTER SC R1 PAIR INSTRUCTION The first step is to connect the board and the remote control. Before you start, make sure that the board and the remote control are switched off. Switch on the board. Press the power button for 5 seconds until the light of the power button starts flashing.
User Manual MODSTER SC R1 SPECIFICATION Mileage up to 8 km Low speed up to 10 km/h Capability Medium speed up to 15 km/h Max speed up to 20 km/h Net weight 3,75 kg Size 680 x 190 x 120 mm...
User Manual MODSTER SC R1 SAFETY INSTRUCTIONS The skateboard is not a toy and should be treated with appropriate care. Safety, always comes first, as it is possible to lose balance and cause a lose balance and cause an impact or fall.
User Manual MODSTER SC R1 BATTERY SAFETY INSTRUCTIONS Lithium batteries can explode or cause a fire if mishandled Please treat your skateboard batteries as follows: • Before each charging process and each use of the board, check the battery and charging connection for mechanical damage.
User Manual MODSTER SC R1 DISCLAIMER OF WARRANTY • The maximum total weight and load must not be exceeded. High loads in connection with overloading operation of the device can lead to structural damage. Jumping with the device is not allowed and leads to loss of warranty, as well as driving through potholes and the like.