Herunterladen Inhalt Inhalt Diese Seite drucken

FLINQ FQC8197 Handbuch Seite 3

Solar lamp 97 led 2er pack
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 17
IP 65: Protected against solid objects of 1mm or higher. Protected against splashing
water from all directions. Never immerse this light under water.
The operating life of the product will be less if the ambient temperature is higher than
45°C or lower than -10°C.
MAIN INSTALLATION AND BEST LOCATION POSITION:
NOTE:
During the first use of the product, place the product in a place with sufficient direct sunlight
for first charging at a minimum time for 8 hours in the OFF position!
When the lamp is in a location that receives less sunlight, it will operate for fewer hours
per night. Night lighting time can also vary depending on how bright the sky is on any
given day. Insufficient charging of the battery will affect performance and may result in the
fact that the lamp goes off before dawn because the battery was not fully charged.
The solar panel is best directed as much as possible towards the south in order to
maximize exposure to direct sunlight. Please note that the four different seasons (and
the sun's angle in these 4 different seasons ) can affect the lighting time of the lamp. Winter
time will make the solar panel charge the internal battery less than during summer time.
Select a location that is not located close to other light sources, such as for example
street lighting, because this enables the lamp to be switched off automatically.
Maximum lighting time depends on sunlight and daytime charging. Minimum charging time
is 5~8 hours in direct sunlight.
NOTE:
During winter time or when the sunshine duration is short, it is suggested using the solar
lamp under mode 1.
• Choose a stable, solid and supportive surface and make sure the lamp is mounted and
faced towards the direction of the sun (most south location). Mounting height is 2~3 meters.
• Use the lamp 2 hole's to measure the size distance and mark the correct screw positions.
• Drill in the wall (if needed) and screw the lamp onto the wall using the supplied

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis