Power Tool Use And Care; Battery Tool Use And Care; Service; Safety Of Others - Lincoln SKF TLGB 20 Betriebs- Und Wartungsanleitung

3.8 Do not let familiarity gained from
frequent use of tools allow you to
become complacent and ignore tool
safety principles. A careless action
can cause severe injury within a frac-
tion of a second.

4 Power tool use and care

4.1 Do not force the power tool. Use
correct power tool for your
application. The correct power tool
will do the job better and safer at the
rate for which it was designed.
4.2 Do not use the power tool if the
switch does not turn it on and off.
Any power tool that cannot be con-
trolled with the switch is dangerous
and must be repaired.
4.3 Disconnect the plug from the power
source and/or remove the battery
pack, if detachable, from the power
tool before making any adjust-
ments, changing accessories, or
storing power tools. Such preventive
safety measures reduce the risk of
starting the power tool accidentally.
4.4 Store idle power tools out of the reach
of children and do not allow per-
sons unfamiliar with power tool or
these instructions to operate the
power tool. Power tools are danger-
ous in the hands of untrained users.
4.5 Maintain power tools and accessories.
Check for misalignment or binding
of moving parts, breakage of parts
and any other condition that may
affect power tool's operation. If
damaged, have the power tool
repaired before use. Many accidents
are caused by poorly maintained
power tools.
4.6 Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
4.7 Use the power tool, accessories and
tool bits etc. in accordance with
these instructions, taking into
account the working conditions and
the work to be performed. Use of
the power tool for operations different
from those intended could result in a
hazardous situation.
4.8 Keep handles and grasping surfaces
dry, clean and free from oil and
grease. Slippery handles and grasp-
ing surfaces do not allow for safe han-
dling and control of the tool in unex-
pected situations.

5 Battery tool use and care

5.1 Recharge only with the battery
charger specified by the manufac-
turer. A charger that is suitable for
one type of battery pack may create a
risk of fire when used with another
battery pack.
5.2 Use power tools only with specifi-
cally designated battery packs. Use
of any other battery packs may create
a risk of injury and fire.
5.3 When battery pack is not in use,
keep it away from other metal
objects, like paper clips, coins, keys,
nails, screws or other small metal
objects, that can make a connection
from one terminal to another.
Shorting battery terminals together
may cause burns or fire.
5.4 Under abusive conditions, liquid
may be ejected from the battery;
avoid contact. If contact acciden-
tally occurs, flush with water. If liq-
uid contacts eyes, additionally seek
medical help. Liquid ejected from the
battery may cause irritation or burns.
5.5 Do not use a battery pack or tool that is
damaged or modified. Damaged or
modified batteries may exhibit unpre-
dictable behaviour resulting in fire,
explosion or risk of injury.
5.6 Do not expose a battery pack or tool to
fire or excessive temperature.
Exposure to fire or temperature above
130 °C may cause explosion. NOTE
The temperature "130 °C" may be
replaced by the temperature "265 °F".
5.7 Follow all charging instructions and do
not charge the battery pack or tool
outside the temperature range
specified in the instructions. Charg-
ing improperly or at temperatures
outside the specified range may dam-
age the battery and increase the risk
of fire.

6 Service

6.1 Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This
will ensure that the safety of the
power tool is maintained.
6.2 Never service damaged battery
packs. Service of battery packs
should only be performed by the
manufacturer or authorized service
providers.
5

Safety of others

This appliance is not intended for use by
persons with reduced physical, sensory or
mental capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use of
the appliance by a person responsible for
their safety.
Children should be supervised to ensure
that they do not play with the appliance.

Specific safety

Always wear eye protection. The
can generate up to 10 000 psi (689 bar).
Use only Lincoln 1218, 1224, 1230, 1236 or
1248HP outlet whip hoses. Grease injection
injuries are a very serious injury. Hold hose
only in area of spring guard. Avoid accidental
starting. Be sure switch is not depressed
when inserting battery pack. Replace the
hose at the first sign of wear, kink or damage
to the outside jacket.
Do not bend hose so that it becomes
kinked.
Do not overreach. Keep proper footing
and balance at all times. Proper footing and
balance enable better control of the tool in
unexpected situations.
Use safety equipment. Always wear
eye protection.
Dust mask, non-skid safety shoes, hard
hat or hearing protection must be used for
appropriate conditions.
The gun uses lubricants, that may be
flammable and poisonous if ingested.
Do not use gun near open flame or other
fire hazards.
Grease is often marketed as high temper-
ature because it must maintain its lubricat-
ing properties in hot areas, but the lubri-
cants may be flammable if the temperature
is too high. Please read all warnings on
lubricants before using this gun.
Do not use flammable greases with this
grease gun.
SKF TLGB 20