Parameter Setting - HOMCOM 920-077V70 Montageanleitung

V . Memory height Setting
In normal state ,press the s button ,the height start to flash.If press
button ,the LED display will show "1"and record the current height
to the height . If press
and record the current height to the
If you didn't press the button within 6 seconds during display flashing , the memory
mode is exited.
VI . Parameter Setting
Press and hold the
"S--" and start flashing;
Press the button again to enter the setting mode and display the
function name, switch by
The display unit of the table height: Unit(
Display brightness: Brightness (
The strength of collis n protection: Collision Force(
Use the height limit setting: Set Height(
Buzzer switch: Beep (
The function of each button in the setting mode:
Back button to return to the previous menu.
Options to switch.
Confirm key (confirm to enter the next level menu of the current interface or
confirm the current parameter item) If the key is not pressed within 20 seconds,
exit the setting mode.
Tube Material
Frame Adjustable Height
Depth of desk frame
Load Capacity
Speed
button ,the LED display will show "2"
height .
button for 3 seconds, the handle will display
, he functions that can be set are:
);
);
-15-
);
);
);
Steel
745 - 1145mm
23.6" / 600mm
132 lbs / 60kgs
0.63" / s , 16mm / s