Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating Instructions
RF-WM-230
Multi-Device Wireless Mouse
Item No. 2254842
Intended use
The product is a wireless optical mouse that can be
connected to three devices via Bluetooth or using the
pre-paired USB receiver. You can switch between
connected devices using the select channel button,
an indicator will light up to show which channel is
active.
Contact with moisture must be avoided under all
circumstances.
For safety and approval purposes, you must not
rebuild and/or modify this product. If you use the
product for purposes other than those described
above, the product may be damaged. In addition,
improper use can result in other hazards. Read the
instructions carefully and store them in a safe place.
Make this product available to third parties only
together with its operating instructions.
This product complies with the statutory national and
European requirements. All company names and
product names are trademarks of their respective
owners. All rights reserved.
Delivery content
•
Mouse
•
USB receiver
•
1x AA battery
•
Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at
www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
Safety instructions
Read the operating instructions
carefully and especially observe
the safety information. If you do not
follow the safety instructions and
information on proper handling in
this manual, we assume no liability
for any resulting personal injury or
damage to property. Such cases will
invalidate the warranty/guarantee.
Operating elements
1
2
3
4
1 Left click
6 Scroll-click wheel
2 Channel indicator lights
7 DPI indicator
3 Forward button
8 Select channel /
4 Back button
Bluetooth pairing button
5 Right click
9 Battery compartment cover
a) General information
• The device is not a toy. Keep it out of the reach of
children and pets.
• Do not leave packaging material lying around
carelessly. This may become dangerous playing
material for children.
• Protect the appliance from extreme temperatures,
direct sunlight, strong jolts, high humidity,
moisture, flammable gases, steam and solvents.
• Do not place the product under any mechanical
stress.
• Please handle the product carefully. Jolts,
impacts or a fall even from a low height can
damage the product.
• Consult an expert when in doubt about the
operation, safety or connection of the appliance.
• Maintenance, modifications and repairs must only
be completed by a technician or an authorised
repair centre.
• If you have questions which remain unanswered
by these operating instructions, contact our
technical support service or other technical
personnel.
• The mouse may not work well on some surfaces,
use a mouse pad for best results.
b) LED light
• Attention, LED light:
- Do not look directly into the LED light!
- Do not look into the beam directly or with
optical instruments!
c) (Rechargeable) batteries
• Correct polarity must be observed while inserting
the (rechargeable) battery.
• The (rechargeable) batteries should be removed
from the device if it is not used for a long period
of time to avoid damage through leaking. Leaking
or damaged (rechargeable) batteries might cause
acid burns when in contact with skin, therefore
use suitable protective gloves to handle corrupted
(rechargeable) batteries.
• (Rechargeable) batteries must be kept out of
reach of children. Do not leave (rechargeable)
batteries lying around, as there is risk, that
children or pets swallow them.
• All (rechargeable) batteries should be replaced at
the same time. Mixing old and new (rechargeable)
batteries in the device can lead to (rechargeable)
battery leakage and device damage.
• (Rechargeable) batteries must not be dismantled,
short-circuited or thrown into fire. Never recharge
nonrechargeable batteries. There is a risk of
explosion!
5
6
7
8
9
10
10 USB receiver (inside battery
compartment)
11 DPI selector
12 Optical sensor
13 Power ON/OFF
Insert battery
1. Open the battery compartment cover (9).
2. Insert 1x AA type battery, matching the polarity
shown inside.
3. Replace the cover.
Low battery - The active channel LED
flashes quickly.
Select channel
1. Press the channel select button to select a
channel or switch between connected devices.
2. The corresponding channel indicator will blink to
indicate which channel is active.
Connection
a) 2.4 GHz (Channel 1)
1. Switch the mouse ON (13).
2. Plug the USB receiver into an available USB port
on your computer.
3. Press the select channel button (8) and choose
channel "1". The corresponding channel indicator
light will blink.
4. The connection will be made automatically.
b) Bluetooth (Channel 2 and 3)
1. Switch the mouse ON.
2. Enable Bluetooth on your computer, tablet, or
smart phone.
Refer to your device operating instructions for
information about how to do this.
3. Press the select channel button and choose
channel 2 or 3.
4. Press and hold the channel select button until the
corresponding channel indicator blinks rapidly.
5. Open the Bluetooth settings on your device and
pair with "BT4.0+2.4G Mouse".
Select DPI
Cursor sensitivity levels can be adjusted by pressing
the DPI button. The higher the number the faster the
tracking speed.
DPI
Indicator
11
800
1x blink
1200
2x blink
12
1600
3x blink
Sleep mode
•
The mouse will enter standby mode after 5 secs
of inactivity, and deep sleep after 30 secs of
13
inactivity.
•
Press any button to resume normal operation.
Care and cleaning
•
Do not use any aggressive cleaning agents,
rubbing alcohol or other chemical solutions as
they can cause damage to the housing and
malfunctioning.
•
Clean the product with a dry, fibre-free cloth.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2022 by Conrad Electronic SE.
Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1,
D-92240 Hirschau hereby declares that this product
conforms to the 2014/53/EU directive.
Click on the following link to read the full
text of the EU declaration of conformity:
www.conrad.com/downloads
Enter the product item number in the search box. You
can then download the EU declaration of conformity
in the available languages.
Disposal
1
a) Product
2.4 G
This symbol must appear on any elec-
2
trical and electronic equipment placed
1
on the EU market. This symbol indicates
3
that this device should not be disposed
2
of as unsorted municipal waste at the
end of its service life.
Owners of WEEE shall dispose of it separately from
unsorted municipal waste. Spent batteries and accu-
mulators, which are not enclosed by the WEEE, as
well as lamps that can be removed from the WEEE in
a non-destructive manner, must be removed by end
users from the WEEE in a non-destructive manner
before it is handed over to a collection point.
Distributors of electrical and electronic equipment
are legally obliged to provide free takeback of waste.
Conrad provides the following return options free of
charge (more details on our website):
•
in our Conrad offices
•
at the Conrad collection points
•
at the collection points of public waste manage-
ment authorities or the collection points set up by
manufacturers or distributors within the meaning
of the ElektroG
End users are responsible for deleting personal data
from the WEEE to be disposed of. It should be noted
1
that different obligations about the return or recycling
of WEEE may apply in countries outside of Germany.
b) (Rechargeable) batteries
Remove batteries/rechargeable batteries, if any, and
dispose of them separately from the product. Accor-
ding to the Battery Directive, end users are legally
obliged to return all spent batteries/rechargeable
batteries; they must not be disposed of in the normal
household waste.
Batteries/rechargeable batteries contai-
ning hazardous substances are labelled
with this symbol to indicate that disposal
in household waste is forbidden. The ab-
breviations for heavy metals in batteries
are: Cd = Cadmium, Hg = Mercury, Pb =
Lead (name on (rechargeable) batteries,
e.g. below the trash icon on the left).
Used (rechargeable) batteries can be returned to
collection points in your municipality, our stores or
wherever (rechargeable) batteries are sold. You thus
fulfil your statutory obligations and contribute to envi-
ronmental protection.
Batteries/rechargeable batteries that are disposed
of should be protected against short circuit and their
exposed terminals should be covered completely
with insulating tape before disposal. Even empty
batteries/rechargeable batteries can contain residual
energy that may cause them to swell, burst, catch fire
or explode in the event of a short circuit.
Technical data
Power supply .................. 1 x 1.5 V AA battery
DPI settings .................... 800, 1200, 1600
Bluetooth version ............ 4.2
Bluetooth name .............. BT4.0+2.4G Mouse
Frequency ....................... 2.403 - 2.480 GHz
Transmission power........ 0 dBm
Transmission distance .... aprox. 10 m
Supported OS ................. Windows
Operating conditions ....... -5 to +50 ºC, 10 – 85 %
Storage conditions .......... -10 to +50 ºC, 10 – 95 %
Dimensions (W x H x D) . 81 x 42 x 117 mm (mouse)
Weight ............................ 88 g (mouse)
8 (16/32 bit) or
®
above, MacOS X 10.12
or above, Android
5.0 or
above, iPad OS 13.4 or
above
RH (non-condensing)
RH (non-condensing)
14 x 6 x 18.5 mm (USB
receiver)
1.6 g (USB receiver)
*2254842_v2_0322_02_dh_m_en
Werbung
