Atag KD26178A Bedienungsanleitung Seite 108

Maintenance
Cleaning the humidity filter
The humidity filter is located at the bottom part of the shelf above the fruit and vegetable drawer.
24
1. Remove the upper drawer.
2. Lift the shelf as far as possible at the front (A). Then, pull it out from
the grooves at the rear side of the appliance (B).
3. Carefully turn the shelf around so the lower side is facing upwards.
4. Put the shelf onto a flat surface.
5. To remove the filter, lift up the tab as indicated by arrow C. Then,
slide the filter in the direction indicated by arrow D.
6. Wash the filter with water and dry it thoroughly. If there are stubborn
stains on the filter, clean them with mild detergent and a soft cloth.
Then, rinse out the detergent thoroughly with water.
7. Put the filter back: slide it in the direction indicated by arrow E. A
'click' indicates that the filter is firmly back in place.
8. Turn the shelf around and put it back. Make sure it fits well into the
grooves at the rear wall of the appliance (arrow F). Carefully lower
the shelf to put it on top of the fruit and vegetable drawer as
indicated by arrow G.