Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1 . General Information
This torque wrench with built-in angle gauge
has been developed to enable the controlled
tightening and loosening of screw connec-
tors with right- and left-handed threads.
Every HAZET torque wrench with built-in angle gauge
is calibrated for torque as per DIN EN ISO 6789 and for
angle gauges as per factory settings, and delivered with
a serial number, operating instructions and certification.
For intended use of the torque wrench with built-in angle
gauge, it is essential that all safety and other information
in these operating instructions is adhered to. This is the
only way to guarantee problem-free usage of this preci-
sion tool in the long term.
Always keep these operating instructions together with
your HAZET tool.
WARNING: Observe all safety, warning and operating
instructions to ensure the safe and trouble-free opera-
tion of the tool, and to avoid immediate hazards. Please
pay attention to the following symbols.
1
For Your Information
All manuals and user guides at all-guides.com
2 . Explanation of Symbols
READ THE OPERATING INSTRUCTIONS!
The operator is obliged to observe the opera-
ting instructions and to instruct all users of the
tool in accordance with the operating instruc-
tions.
NOTE!
This symbol marks advice which is helpful
when using the device.
CAUTION!
This symbol indicates important specifica-
tions, dangerous conditions, safety risks and
safety advice.
ATTENTION!
This symbol indicates advice which if disre-
garded results in damage, malfunction and/or
functional failure of the device.
QUALIFIED PERSONNEL ONLY!.
Tool may be used by qualified personnel only.
Disregard may lead to injuries to persons or
damage to the tool or the workpiece
15
Werbung
Inhaltsverzeichnis
