Safety Notes; Important Notes; Functions - Märklin H0 BR 065 Bedienungsanleitung

Safety Notes

• This car is to be used only with an operating system
designed for it (Märklin AC, Märklin Delta, Märklin Digital
or DCC).
• Use only switched mode power supply units and transfor-
mers that are designed for your local power system.
• This car must never be supplied with power from more
than one transformer.
• Pay close attention to the safety notes in the
instructions for your operating system.
• Do not expose the model to direct sunlight, extreme
changes in temperature, or high humidity.
• WARNING! Sharp edges and points required for operation.
• The LEDs in this item correspond to Laser Class 1 accor-
ding to Standard EN 60825-1.

Important Notes

• The operating instructions and the packaging are a com-
ponent part of the product and must therefore be kept as
well as transferred along with the product to others.
• This model is larger than the customary European loading
gauge. It swings out quite a ways, chiefly on curves.
Please check before using this model for the first time,
to make sure that it can operate on your layout without
hitting signals, catenary masts, bridge railings, tunnel
portals, etc.
• Only one pickup shoe may be used in a car consist with
current-conducting couplers.
• The 7203 coupler must be used at the end and beginning
of a train consist with. Danger of short circuit!
See also Page 22.
6
• This specially prepared model is an exclusive version,
which reproduces the condition of the original after many
years of operation in wind and weather.
The artificial weathering was separately applied with
careful hand work by experienced artisans. Despite
a final fixing of the colors with varnish, this additional
application of color does not form a homogeneous, hard
coating.
Therefore, please handle the model with special care
and avoid, scratching, rubbing, or wiping the surface and
the details. Please do not use liquid cleaners or cleaning
solutions.
Please note that the spare parts for this model weathered
at the factory are only available in non-weathered
version.
• Please see your authorized Märklin dealer for repairs or
spare parts.
• Disposing: www.maerklin.com/en/imprint.html

Functions

• Recognition of the mode of operation: automatic.
• Mfx technology for the Mobile Station / Central Station.
Name set at the factory: BDymf 457 DB
• Address set at the factory: MM 68 / DCC 03
• Various controllable functions.
• Controllable current-conducting coupler for supplying
power to other cars (maximum load 200 milliamps).