Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
PARTS
1.
Handle
2.
LED light
3.
Storage baskets
4.
LED display and temperature
control
5.
Drainage opening
6.
Wheels to move the appliance
INSTALLATION
·
Remove the exterior and interior packing, wipe the outside thoroughly with a soft dry cloth and the
inside with a wet, lukewarm cloth. Dry the appliance off well.
·
Let air circulate freely around the cabinet.
·
Make sure there is sufficient space to open the door.
·
This cooling unit is not intended for use as a built-in appliance.
·
Select a place with a strong, level floor.
·
Avoid direct sunlight and heat. Direct sunlight may affect the acrylic coating. Heat sources nearby will
cause higher electricity consumption.
·
Avoid very moist places. Too much moisture in the air will cause frost to form very quickly on the
evaporator, and your freezer.
·
Unwind the power cord from the cord storage hooks at the back of the appliance.
38
DO91218F
Werbung
Inhaltsverzeichnis
