Technical Data; Noise/Vibration Information - Bosch GBH 18V-34 CF Professional Originalbetriebsanleitung

(15) Button for depth stop adjustment
(16) Auxiliary handle (insulated gripping surface)
(17) Depth stop
(18) Rechargeable battery release button
(19) User Interface
(20) Drill chuck mounting
(21) Front sleeve of the keyless quick-change chuck
(22) Retaining ring of the keyless quick-change chuck
(23) Battery charge indicator (user interface)
(24) Rapid shut-off indicator (KickBack Control) (user
interface)
(25) Working modes indicator (user interface)
(26) Button to select the working mode (user interface)
(27) Power tool status indicator (user interface)
(28) Smartphone symbol (user interface)
(29) Temperature indicator (user interface)
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.

Technical Data

Cordless rotary hammer
Article number
Rated voltage
Rated power input
A)
Impact rate
Impact energy per stroke ac-
cording to EPTA-Proced-
ure 05:2016
Rated speed
– Clockwise
– Anticlockwise
Tool holder
Spindle collar diameter
Max. drilling diameter:
– Concrete
– Masonry (with hollow core
bit)
– Steel
– Wood
Weight according to EPTA-
B)
Procedure 01:2014
Length
Height
Recommended ambient tem-
perature during charging
Bosch Power Tools
Cordless rotary hammer
Permitted ambient temperat-
ure during operation
during storage
a)
Compatible rechargeable
batteries
Recommended rechargeable
batteries for maximum per-
formance
Recommended chargers
Data transfer
Bluetooth
Signal interval
Max. signal range
A) Measured at 20–25 °C with rechargeable battery ProCORE18V
B) Depends on battery in use
C) Limited performance at temperatures < 0 °C
D) The mobile terminal devices must be compatible with
GBH 18V-34 CF
E) The signal range may vary greatly depending on external condi-
3 611 J14 0..
V= 18
W 750
-1
min 0–2900

Noise/Vibration Information

J 5.8
Noise emission values determined according
to EN 62841-2-6.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 92 dB(A); sound power
level 103 dB(A). Uncertainty K = 3 dB.
-1
min 0–500
Wear hearing protection!
-1
min 0–500
Vibration total values a
SDS plus
determined according to EN 62841-2-6:
mm 74
Hammer drilling into concrete: a
Chiselling: a
mm 32
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
mm 40–82
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
mm 13
estimation of vibration and noise emissions.
mm 40
The stated vibration level and noise emission value repres-
kg 5,2−6,3
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
mm 430
and noise emission value may differ. This may significantly
mm 250
increase the vibration and noise emissions over the total
°C 0 to +35
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
C)
and
®
E)
8.0Ah.
Bluetooth® Low Energy devices (version 4.2) and support the
Generic Access Profile (GAP).
tions, including the receiving device used. The Bluetooth® range
may be significantly weaker inside closed rooms and through
metallic barriers (e.g. walls, shelving units, cases, etc.).
(triax vector sum) and uncertainty K
h
=10.9 m/s
h
2 2
=11.7 m/s , K=1.5 m/s
h
1 609 92A 7SJ | (23.06.2022)
English | 19
GBH 18V-34 CF
°C –20 to +50
GBA 18V...
ProCORE18V...
ProCORE18V...
≥ 5.5 Ah
GAL 18...
GAX 18V...
GAL 36...
®
Bluetooth 4.2
D)
(Low Energy)
s 8
m 30
2 2
, K=1.5 m/s ,
,