Bresser 60/700 Bedienungsanleitung Seite 14

Now, you turn to the telescope tube
and find the following pieces:
Telescope tube
Finderscope
Finderscope holder
Vertical adjustment
zenith mirror
eyepiece extenders and screws
Eyepieces
Spiral screws and Washers
14
b
First, you need to fix connect the finderscope
to the finderscope holder (insert and tighten
with three screws).
c
You will notice three threads protruding from
the telescope tube. Here, you can attach the
holder with the finderscope.
d
Next, screw the vertical fine adjustment to
the protruding silver metal supports on the
telescope tube.
E
Now it's going to get difficult! It is best if you
let someone help you. You need to attach the
telescope tube to the tripod. To do so, take
the spiral screw with the washers and screw
the tube to the tripod head.