Common Problems And Treatment Methods; Product Parameters - HOMCOM A90-175 Bedienungsanleitung

EN

Common problems and treatment methods

case
Can not start
"Xiuxiu"or"Dada"
sounds when the
machine is working
Remote control
operation did not
respond
Stop during use
Can't operate
normally
If it has not been removed after the above method, please contact the manufacturer or local
distributor, do not disassemble and repair it.

Product Parameters

Product name: Vibration Platform
Voltage: AC220V-240V
Power: 200W
probable cause
The power plug is not plugged in.
Product power switch is not
turned on
The instantaneous current is too
large and the fuse is blown
This is the sound that the machine
makes when it is running, not the
machine failure. It is a normal
working sound.
The remote control battery is
dead
The remote control is too far from
the machine
Has reached the default working
time
May execute commands
frequently
t
50Hz
method
Plug in the power plug
Turn on the power switch
Replace the fuse of the same
model
No need to deal with
Replacement battery
The effective distance of infrared
sensing is 2.5 meters
Turn it on again after 10 minutes
too Turn off the power and restart
-16-