Random Playback; Bluetooth Mode - Reflexion DJ900BT Bedienungsanleitung

(hold):
FOLD / 10. +:
FOLD / 10. + (hold):
Note:

Devices other than USB sticks cannot be used with this device.

The use of USB extension cables is not recommended.

Do not pull the USB stick out of the device during playback.

Not suitable for charging smartphones etc.
SET PLAYBACK MODE:
1. During playback, press the P-MODE button repeatedly until the desired
playback mode is set.
2. A corresponding symbol is shown in the display when a playback mode
has been selected.
3. The following playback modes are available.

REPEAT A TITLE:

REPEAT ALL TITLES:

REPEAT FOLDER:


RANDOM PLAYBACK:

BLUETOOTH MODE

1. Press the FUNCTION /
display.
The "PAIR indicator" flashes at high speed.
2.
3. Switch on the Bluetooth function on the external device and start the scan
function.
Select the "DJ900BT" device to connect the devices. When prompted for
4.
a password, enter the password 0000.
The "pair indicator" stops flashing and is now lit permanently. The
5.
external device is now connected to the DJ900BT.
6. Press the
7. The basic volume is specified by the connected device. You can adjust the
volume with the Volume control.
8. Press and hold the
Note:

Bluetooth works best within 10 meters outdoors.

After switching on the device, the DJ900BT connects to the last
paired device, if within range.

Can only receive Bluetooth, not send it.
Rewind
Next track +10
Next folder
button repeatedly until "bt" appears on the
/ PAIR button to start playback.
/ PAIR button to disconnect Bluetooth.
8
FOLDER
RAND
GB