Natec SISKIN 2 Benutzerhandbuch Seite 2

EN
USER MANUAL
INSTALLATION
PAIRING A NEW DEVICE WITH MOUSE
IN BLUETOOTH MODE
• Move the ON/OFF switch located at the bottom of the mouse to
ON position
• Turn ON Bluetooth in device which you want to pair with the
mouse
• Use the button for changing the channel located on the bottom
of the mouse, select the channel BT1 or BT2 and then hold
down the same button for about 5 seconds to enter into pairing
mode. The LED diode will start flashing rapidly
• Then go to the Bluetooth settings on your device and select
from the list of mouse Siskin 2
• After successful pairing, the LED on the mouse will stop flashing
• The mouse is ready for use
CONNECTING THE MOUSE WITH
THE PREVIOUSLY PAIRED DEVICE
• Turn ON Bluetooth on your device that you have
previously paired with the mouse
• Turn ON or wake up the from hibernation
• The mouse will automatically connect with the device
DPI CHANGE
To change DPI resolution press and hold the right button +
scroll wheel at same time for about 5 seconds.
The mouse will switch to the next DPI level. Available are 3
levels of DPI settings (800 – 1200 – 1600) which can be
switched in loop.
REQUIREMENTS
• Device equipped with a USB port or Bluetooth 4.0 and above
• Operating systems: Windows® 7/8/10/11,
Linux, Android, Mac, iOS
SAFETY INFORMATION
• Use as intended, improper usage may break the device.
• Non-authorized repairs or disassembly voids the warranty and
may damage the product.
• Dropping or hitting the device may lead to device being
damaged, scratched or flawed in other way.
• Do not use the product in low and high temperatures, strong
magnetic fields and damp or dusty surroundings.
CONNECTION OF MOUSE
VIA USB RECEIVER
• Turn ON your computer or other compatible device
• Make sure the ON/OFF switch located at the bottom of the
mouse is in the ON position
• Use the button for changing the channel located on the
bottom of the mouse and select the channel indicated with
USB receiver symbol
• Connect receiver to a free USB port on your computer
• The operating system will automatically install the required
drivers
• The mouse is ready for use
Note:
• The device is equipped with intelligent technology for energy
management. When the mouse enter into hibernation (sleep)
mode, press any button of the mouse for its revival.
• The mouse is equipped with an ON/OFF switch to save the
battery power when not in use for longer period.
INSERTING/REMOVING BATTERY
Frequency band: 2402 MHz – 2480 MHz
Maximum radio-frequency power: 4.315 dBm
GENERAL
• 2 years limited manufacturer warranty
• The safe product, conforming to the EU requirements.
• The product is made in accordance with RoHS European
standard.
• The WEEE symbol (the crossed-out wheeled bin) using
indicates that this product in not home waste. Appropriate
waste management aids in avoiding consequences which are
harmful for people and environment and result from dangerous
materials used in the device, as well as improper storage and
processing. Segregated household waste collection aids
recycle materials and components of which the device was
made. In order to get detailed information about recycling this
product please contact your retailer or a local authority.
• Hereby, IMPAKT S.A. declares that that the radio equipment
type NMY-1970, NMY-1971, NMY-1972, NMY-1978, NMY-1979
is in compliance with Directives 2014/53/EU, 2011/65/EU and
2015/863/EU. The full text of the EU declaration of conformity
is available via the product tab at www.impakt.com.pl.