Cleaning And Maintenance; 61 De-Rusting And Rust Protection; Sharpening - AmazonBasics B07V8X5W5R Bedienungsanleitung

EN
» It is recommended to prepare a little grove before the actual
work� This way the cutting edge cannot slip away when using
more force�
» After the work is finished, always put the tip cover on the
cutting edge (C)�

6 Cleaning and Maintenance

61 De-rusting and rust protection
» Use commercially available rust cleaner or citrus cleaner� Wear
gloves and follow manufacture's cleaning instructions�
» Spray the metal components� Let them stand for several
minutes then, using steel wool, brass brush or toothbrush,
scrub off as much of the rust as you can.
» To prevent the metal parts from rusting, keep them lubricated
with a commercially available lubrication solution�
NOTICE
Some lubrication solutions may interact with the
wood what may affect the look of the wood. Ask your dealer for
an accurate lubrication solution�
62

Sharpening

If the cutting edge (C) is blunt, primely sharpen it on the
#120 grain (darker gray) side of the sharpening stone (H). Do the
precision sharpening on the #240 grain (brighter gray).
Lubricate the sharpening stone with oil�
8