Herunterladen Inhalt Inhalt Diese Seite drucken

Mounting And Operation; Disposal Considerations - auna PRO MIC 900 LED Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

EN
12

MOUNTING AND OPERATION

To get the sound you want, try changing the mic position relative to the
sound source oreven move the microphone around in the recording room
of your studio. Adjusting the angle at which walls face the sound source
can also be helpful. Only when the desired basic sound has been achieved,
should you start to use equalizers and signal processors,if any at all. Due
to the extremely linear frequency response and the high sonic resolution
of your microphone, there is no need for high-frequency "EQing" that can
heavily influence the signal and unnecessarily increase the noise level. The
microphone provides that much-desired transparency which often gets lost
during recording and mixing. There is an adapter on your microphone that
lets you mount it on mic stands with either metric (Europe) or imperial-gauge
threads (North America).
First dismantle the microphone from the stand mount adapter by detaching
the fine-thread shoulder screw at the bottom end of the microphone. Fasten
the adapter onto the microphone stand, place the micropho- ne into it
and tighten the screw again. Basically, the microphone in the stand mount
adapter should stand upright and face the sound source at a right angle.
The angle of the microphone to the sound source influences the sound
of the recording; therefore, experi ment with different positions until you
achieve the desired sound.
NOTE: Please make sure to handle the microphone shaft with attention
and care to avoid damaging the screw thread. In no situation should you
ever apply excessive force.

DISPOSAL CONSIDERATIONS

If there is a legal regulation for the disposal of
electrical and electronic devices in your country,
this symbol on the product or on the packaging
indicates that this product must not be disposed
of with household waste. Instead, it must be taken
to a collection point for the recycling of electrical
and electronic equipment. By disposing of it in
accordance with the rules, you are protecting the
environment and the health of your fellow human
beings from negative consequences. For information
about the recycling and disposal of this product,
please contact your local authority or your household
waste disposal service.

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

1003878610028787

Inhaltsverzeichnis