Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Technical requirements
Your microphone comes with a USB connector. The audio signal is sent from
the microphone to the com- puter through this connection. At the same time
the computer uses the USB connection to supply the mi- crophone with the
necessary power. A connection is made by using the included USB cable
with type-B connector.
NOTE: Use only the included cable to ensure an optimal signal quality
and a reliable power supply. To ope- rate the microphone, your computer
needs to meet the following system requirements:
Windows PC
Intel or AMD CPU, 1GHz or higher
minimum 512MB RAM
USB 2.0 interface
Windows XP/Vista
INITIAL OPERATION
•
Power up your computer.
•
Connect your microphone to a free USB port on your computer
NOTE: Your operating system automatically installs the required drivers.
•
Select the microphone as input source in your preferred audio software
application.
Windows:
•
Adjust the recording level as required, using the Windows Volume
Control panel. (Shortcut: Louds- peaker icon found in the taskbar)
•
Select the microphone in the pull-down menu of Sound recording by
clicking on Sounds and Audio Devices in the Control Panel and then
clicking the tab Audio
Mac OS:
•
Adjust the recording level as required, using Audio Midi Setup in Mac
OS. NOTE: Your microphone is now ready for use.
Mac
G4/G5, 800MHz or higher
minimum 512MB RAM
USB 2.0 interface
Mac OS X 10.3.9 (Panther) or higher
EN
11
Werbung
Inhaltsverzeichnis
