Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7
Specifications:
Type
Flow rate
Max, operating pressure
Measurement accuracy
Repeatability
Viscosity range
Operating temperature
Max. air humidity
Protection class
Delivery unit
Display Partial quantity
(resettable)
Display Total quantity TOTAL
1.
TOTAL RESET resettable
2.
TOTAL not resettable
Display Flow rate
[FLOWRATE]
Power supply
Connection thread
Dimensions
L x W x H (mm)
Weight
Pumped media:
The DIGIMET AFM 30 Turbine wheel meter is suitable for transferring and filling AdBlue urea
solutions, water and antifreeze.
Flammable liquids such as petrol and diesel, solvents, chemicals, corrosive media and
liquids with a viscosity > 20 cSt must not be conveyed with the meter. Any other use, as well
as conversion or modification of the device is only permitted after consultation with the
manufacturer.
If media not listed here are used, please clarify this with our technical department.
8
Disposal:
with the applicable legal regulations.
Your contribution to environmental protection:
The operator must observe the applicable regulations for the display, installation and operation
of systems for handling substances hazardous to water. (such as WHG, VawS and TRbF)
(Federal German Water Act, Order on the storage, filling and transfer of hazardous media and
Technical Regulations for Flammable Liquids)
14
MATO
GmbH & Co. KG
2 x AAA Micro LR03 (1.5V)
After termination of use, the device must be disposed of correctly in accordance
/ Benzstr. 16-24 / 63165 Mühlheim a. Main / Tel:00 49(0)6108-906-0 / Fax: 00 49(0)6108-906-120
DIGIMET AFM 30
5-100 l/min.
10 bar
+/-1%
< 0,3%
1 – 6 cSt
-10°C to 50°C
95%
IP65
Litre / L
US gallons / GAL
Quarter / QTS
Pint / PTS
0.000 – 99999
0.1-999999
1-100 l/min.
1" BSP
100
70
55
x
x
0.25 kg
Operating instructions
DIGIMET AFM 30
Werbung
Inhaltsverzeichnis
