Preparation For Operation - Gymrex GR-MG120 Bedienungsanleitung

3.2. Preparation for operation

DEVICE PLACEMENT
The device (A) should be placed on a hard, flat and dry ground. The adjacent surface
should be non-slip. It is recommended to leave a training space (B) of 1.2m x 1.2m
around the device and an additional free space (C) of 0.6m x 0.6m.
APPLIANCE ASSEMBLY
The assembly of the device should follow the sequence shown in the illustrations
below. Before starting the assembly, it is recommended to group the components.
STEP I