Quick Start Guide - online XANTO-Serie Sicherheitsinformation Und Schnellstartanleitung

Quick start guide

1. 19" rack installation (XANTO 6000 / 10000 only)
Adjust the display direction of the UPS system for horizontal rack installation. To do this, remove the front pa-
nel by pulling it forward. Then push the plastic catches on the display apart to release it. Rotate it 90 degrees
and insert it back into the front panel. Finally, fit the front panel by reversing the sequence.
2. Mechanical installation
Position the UPS system on an even, stable surface for its final location. For the rack tower versatile models,
proceed as shown in the diagrams below:
Rack tower versatile model as a tower
1
Rack tower versatile model in 19" rack
2 1
2
Safety information and quick start guide UPS XANTO
Page 10
•