Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Programming the timer:
This function allows you to programme the start/stop time. You can programme up to 3 different start/stop
times. The setting is as follows:
•
Press and hold
for 3s to go to the timer function.
•
Select the program to be configured with the
•
Press
to programme the start time - ON lights up.
•
Set the hours with the
•
Press
to switch to the minutes.
•
Set the minutes with the
•
Press
to programme the stop time - OFF lights up.
•
Set the hours with the
•
Press
to switch to the minutes.
•
Set the minutes with the
•
Press
to return to the main screen.
Activating the timer:
After the program has been defined, it can be activated as follows:
•
Press and hold
for 3s to go to the timer function.
•
Select the program to be activated with the
•
Press and hold the
button until the ON/OFF indicators light up.
•
Press
to return to the main screen.
The pump switches itself off and starts and stops again at the set time.
The ON/OFF lights indicate an active program; the digit at the beginning of the line indicates the number of the active pro-
gram.
Deactivating the timer:
After the program has been activated , it can be deactivated as follows:
•
Press and hold
for 3s to go to the timer function.
•
Select the program to be deactivated with the
•
Press and hold the
button until the ON/OFF indicator is no longer lit.
•
Press
to return to the main screen.
The ON/OFF lights indicate an active program; the digit at the beginning of the line indicates the number of the active pro-
gram.
Status values:
The status values can be checked via the remote control by following the steps below:
•
Press and hold the
button until you enter the settings check mode.
•
Press
and
to check the status values.
•
Press
to return to the main screen.
Table of status values:
Code
Description
A01
Water inlet temperature (-30~150°C)
A02
Water outlet temperature (-30~150°C)
A03
Ambient temperature (-30~150°C)
A04
Outlet gas temperature (0~150°C)
A05
Intake gas temperature (-30~150°C)
A06
Coil outer temperature (-30~150°C)
A07
Coil internal temperature (-30~150°C)
and
and
buttons.
and
buttons.
and
buttons.
and
buttons.
and
and
buttons.
buttons.
buttons.
8
23
Werbung
Inhaltsverzeichnis
