Herunterladen Inhalt Inhalt Diese Seite drucken

T.I.P. STEAM 35000 INV Original-Gebrauchsanweisung Seite 24

Poolwärmepumpe
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Heating mode (inverter)
Select the heating mode for the heating pump to intelligently heat the water in your pool.
Fix mode (heating only)
Select the fix heating operating mode for the heat pump to heat the water in your pool with
constant power.
ECO quiet mode
Select the silent heating operating mode so that the heat pump heats the water at reduced
speed.
Cooling mode (inverter)
Select the cooling mode for the heat pump to intelligently cool the water in your pool.
Heating mode (inverter):
Press and hold
for 3s to switch from one mode to the other until the heating mode is displayed.
Use the
and
buttons to select the desired temperature (15-40°C).
Fix mode (heating only):
Press and hold
for 3s to switch from one mode to the other until the FIX heating mode is displayed.
Use the
and
buttons to select the desired temperature (15-40°C).
ECO quiet mode:
Press and hold
for 3s to switch from one mode to the other until the ECO heating mode is displayed.
Use the
and
buttons to select the desired temperature (15-40°C).
Cooling mode (inverter):
Press and hold
for 3s to switch from one mode to the other until the cooling mode is displayed.
Use the
and
buttons to select the desired temperature (8-28°C).
If cooling mode changes to heating mode or vice versa, the heat pump restarts after 10 minutes.
If the temperature of the incoming water is lower than the set temperature (-1 °C), the heat pump switches to
heating mode. The compressor stops if the temperature of the incoming water is higher than the set tempera-
ture.
Under normal conditions, a suitable heat pump can warm the water in a swimming pool by 1°C to
2°C per day. It is therefore normal not to feel any temperature difference in the system when the
heat pump is in operation.
A heated swimming pool should be covered to avoid any heat loss and thus be more efficient.
Setting the time on the device:
Set the system clock to the local time as follows:
Press
to set the time - the hours flash.
Set the hours with the
Press
to switch to the minutes.
Set the minutes with the
Press
to confirm the set time and return to the main screen.
22
and
buttons.
and
buttons.
7

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Steam 45000 inv

Inhaltsverzeichnis