Technical Data; Use - Masuria Juno Gebrauchsanweisung

6. TECHNICAL DATA

Model Weight
Juno lamp 25 kg 46 × 46 × 138 cm Corten / Black natural / white
Nexo lamp 16 kg

7. USE

CAUTION!
The lamp may be started only after completing its installation. Do not fill-up the fuel
when the lamp is operating. Do not light up the equipment when it is hot. The com-
bustion container may be hot even for one hour after extinguishing the fire. Before
filling-up the fuel, check the combustion container whether there are any leakages.
If the biofuel is spilled, wipe out the surface which contacted the fluid immediately
with a paper towel.
Lighting up the lamp
a
1. Remove the glass lampshade (Dwg. 2a).
2. Fill up the combustion container with gel (Dwg. 2b).
3. Light up the lamp with the use of long fireplace matches or a fireplace lighter.
4. Put the lampshade on (Dwg. 2d).
5. A proper colour and height of flame is achieved after about 10 minutes of burning.
During burning, it is necessary to keep a safe distance from the lamp (at least 1 m).
Dimensions
width x depth x
height
37 × 37 × 129 cm Corten / Black
CAUTION!
A risk of burning. Pay utmost attention
when lighting up the lamp.
b
Colours Rope
-
c
Air access
adjustment
automatic
automatic
d Dwg. 2
15
EN