Inhaltsverzeichnis; Safety Instructions; Important Safeguards; Cleaning - GBC SmartPunch Plus Bedienungsanleitung

TABLE OF CONTENTS
1. SAFETY INSTRUCTIONS
Important safeguards
Cleaning
Service
Safety messages
2. INTRODUCTION
3. QUICK START GUIDE
4. USER OPERATIONS

1. SAFETY INSTRUCTIONS

THE SAFETY OF YOU AND OTHERS IS VERY IMPORTANT TO GBC.
IMPORTANT SAFETY MESSAGES AND INFORMATION ARE
CONTAINED IN THIS MANUAL AS WELL AS ON THE MACHINE
ITSELF. PLEASE MAKE SURE YOU CAREFULLY READ AND
UNDERSTAND ALL OF THESE BEFORE
MACHINE.
THE SAFETY ALERT SYMBOL PRECEDES EACH SAFETY
MESSAGE IN THIS OPERATION INSTRUCTIONS MANUAL.
THIS SYMBOL INDICATES A POTENTIAL PERSONAL
SAFETY HAZARD THAT COULD HURT YOU OR OTHERS.
THE FOLLOWING PICTORIAL IS FOUND ON THE SMARTPUNCH
PLUS:
This safety symbol means that you might get
seriously hurt or killed if you open the product
and expose yourself to hazardous voltage.
NEVER remove the screwed-on covers.
ALWAYS refer service requirements to
qualified service personnel.
3 5. USER DISPLAY
3 6. PROBLEM SOLVING
3 7. SPECIFICATIONS
4 8. DIE SET USER MANUAL
4
4
5
6

Important safeguards



OPERATING THE







Cleaning



SmartPunch Plus
Use the SmartPunch Plus only for its intended purpose of punching,
creasing, & perforating paper and covers according to the indicated
specifications.
Retain the Operation Instructions manual for future use.
CAUTION: THE PRINTER ON/OFF SWITCH DOES NOT
CUT OFF POWER FROM THE DEVICE.
The SmartPunch Plus must be connected to a supply voltage
corresponding to the electrical rating of the machine operation
instructions (also listed on the serial number label).
The grounding plug is a safety feature and will only fit into the proper
grounding-type power outlet. If you are unable to insert the plug into
an outlet, contact a qualified electrician to have a suitable outlet
installed.
Do not alter the plug on the end of the cordset (if provided) of the
SmartPunch Plus. It is provided for your safety.
Unplug the SmartPunch Plus before moving the machine or
whenever the machine is not in use for an extended period.
Do not operate the SmartPunch Plus if the machine has a damaged
power supply cord or plug. Do not operate the machine after any
malfunction. Do not operate the machine in case of liquid spills, or
if the machine has been damaged in any other way.
Do not overload electrical outlets beyond their capacity. To do so
may result in fire or electrical shock.
You may clean the exterior of the SmartPunch Plus using a soft,
damp cloth.
Do not use detergents or solvents as damage to the machine may
occur.
GB
7
9
9
10
3