Optika Italy B-190-Serie Bedienungsanleitung Seite 11

7.2 Polarizing set (optional)
1. Place the polarizer on the light exit
croscope. (Fig. 11)
2. Loosen the head fixing knob
the microscope frame. (Fig. 12)
3. Insert the analyzer into the hole inside the frame
4. Put back the head into its original position and lock the fixing
knob.
at the base of the mi-
①
and remove the head from
②
. (Fig. 13)
③
Page 11
①
F F ig. 11 ig. 11
②
F ig. 12 F ig. 12
③
F ig. 13 F ig. 13