Denon AH-C630W Schnellstartanleitung

128g双铜纸封面
内：
1 3
R
×1 1. Charging
Charge the earphones using the included charging case and
×2 USB cable before use.
1. Put the earphones in the charging case (included) and
close the lid.
×3 Remove the power supply prevention film from the
earphones in advance.
2. Connect the charging case to the AC adapter
(commercially available) with the USB cable (included).
＜20％
The LED on the charging case will light up according to the
LED ≧20％ remaining charge of the earphones.
=100％
• More than 20 %: Blinking green
• Less than 20 %: Blinking red
• Fully charged: Solid green
It will take approx. 2 hours from empty to full charge. The
earphones can be used for approximately 5 hours (with
noise cancel on) when the battery is fully charged. When the
rechargeable battery is low, a notification sounds.
2 4
2. Pairing with Bluetooth device
R Pair the earphones with the Bluetooth device you want to
connect.
1. Open the lid of the charging case.
×2
The earphones will automatically turn on, and the pairing
mode will be activated with a notification sound from the
earphones.
×2
2. Activate Bluetooth function of the Bluetooth device to
be connected.
3. Select the "DENON AH-C630W" appears on the
Bluetooth device to be connected.
A notification sound will be heard from the earphones when
Bluetooth it is connected.
ON
DENON AH-C630W
• If you are requested to enter a PIN code (pass key), enter "0000" (four
1 zeros).
1
AHC-630W EM_Dummy for DPP_210525.indd 1
外：
AH-C630W
True Wireless In-ear Headphone
QUICK
AH-C630W
START
www.denon.com
GUIDE
Printed in China 5411 ***** 00AD
www.denon.com
Copyright ©2021 D&M Holdings Inc. All Rights Reserved.
Printed in China **** ***** **AD
© 2021 Sound United. All Rights Reserved.
AHC-630W EM_Dummy for DPP_210525.indd 15 2021/05/25 17:32:26
AHC-630W EM_Dummy for DPP_210525.indd 1
封底 封面
空白页
2021/05/25 17:32:25
1
2021/05/25 17:32:25
空白白色
1
14
2
12
3
4
10
5
6
7 8
13
11
9