Garmin APPROACH S40 Bedienungsanleitung Seite 13

2
Insert one side of the spring bar for the new band into the
device.
3 Slide the quick-release pin, and align the spring bar with the
opposite side of the device.
4 Repeat steps 1 through 3 to change the other band.
Device Care
Avoid extreme shock and harsh treatment, because it can
degrade the life of the product.
Avoid pressing the keys under water.
Do not use a sharp object to clean the device.
Never use a hard or sharp object to operate the touchscreen, or
damage may result.
Avoid chemical cleaners, solvents, and insect repellents that can
damage plastic components and finishes.
Thoroughly rinse the device with fresh water after exposure to
chlorine, salt water, sunscreen, cosmetics, alcohol, or other
harsh chemicals. Prolonged exposure to these substances can
damage the case.
Do not store the device where prolonged exposure to extreme
temperatures can occur, because it can cause permanent
damage.
Cleaning the Touchscreen
1
Use a soft, clean, lint-free cloth.
2
If necessary, lightly dampen the cloth with water.
3
If using a dampened cloth, turn off the device and disconnect
the device from power.
4
Gently wipe the screen with the cloth.
Cleaning the Device
Even small amounts of sweat or moisture can cause corrosion
of the electrical contacts when connected to a charger.
Corrosion can prevent charging and data transfer.
1
Wipe the device using a cloth dampened with a mild
detergent solution.
2
Wipe it dry.
After cleaning, allow the device to dry completely.
TIP: For more information, go to www.garmin.com/fitandcare.
Long-Term Storage
When you do not plan to use the device for several months, you
should charge the battery to at least 50% before you store the
device. You should store the device in a cool, dry place with
temperatures around the typical household level. After storage,
you should fully recharge the device before using it.
Specifications
Battery type
Battery life
Water rating
Operating temperature range From -20º to 60ºC (from -4º to 140ºF)
Charging temperature range From 0º to 45ºC (from 32º to 113ºF)
Wireless frequency/protocol
1
The device withstands pressure equivalent to a depth of 50 m. For more informa-
tion, go to www.garmin.com/waterrating.
Troubleshooting
NOTICE
NOTICE
Rechargeable, built-in lithium-ion battery
Up to 10 days in watch mode
Up to 15 hr. in GPS mode
1
5 ATM
2.4 GHz @ 3.13 dBm maximum
Troubleshooting
Maximizing Battery Life
You can do several things to extend the life of the battery.
• Reduce the backlight timeout
• Reduce the backlight brightness
• Turn off Bluetooth technology when you are not using
connected features (Turning Off the Bluetooth Smartphone
Connection, page 5).
• Limit the smartphone notifications the device displays
(Managing Notifications, page
My device cannot find nearby golf courses
If a course update is interrupted or canceled before it completes,
your device may be missing course data. To repair missing
course data, you must update the courses again.
1
Download and install course updates from the Garmin
Express application (Updating the Software Using Garmin
Express, page 5).
2
Safely disconnect your device.
3
Go outside, and start a test round of golf to verify the device
finds nearby courses.
Is my smartphone compatible with my
device?
The Approach device is compatible with smartphones using
Bluetooth technology.
Go to garmin.com/ble for compatibility information.
My phone will not connect to the device
If your phone will not connect to the device, you can try these
tips.
• Turn off your smartphone and your device, and turn them
back on again.
• Enable Bluetooth technology on your smartphone.
• Update the Garmin Golf app to the latest version.
• Remove your device from the Garmin Golf app and the
Bluetooth settings on your smartphone to retry the pairing
process.
• If you bought a new smartphone, remove your device from
the Garmin Golf app on the smartphone you intend to stop
using.
• Bring your smartphone within 10 m (33 ft.) of the device.
• On your smartphone, open the Garmin Golf app, select
, and select Garmin Devices > Add Device to enter
pairing mode.
• Hold the button, and select Pair Phone.
My device displays the wrong units of
measure
• Verify you selected the correct units of measure setting on
the device (System Settings, page
• Verify you selected the correct units of measure setting on
your Garmin Connect account.
If the units of measure on the device do not match your
Garmin Connect account, your device settings may be
overwritten when you sync your device.
My device is in the wrong language
1
Hold the button.
2
Select .
3
Scroll down to the sixth item in the list, and select it.
(Backlight Settings, page 8).
(Backlight Settings, page
4).
8).
8).
or
9