Care, storage, and transportation guidelines
The unpackaged device should be stored between 10 and 35°C and
at a relative humidity of no more than 80%.
The device should be protected from direct contact with moisture
and active chemical substances.
In case of long storage, always remove the batteries from the
battery compartment.
Do not disassemble the device.
Do not drop the device.
Do not drop objects onto the device.
We recommend keeping the package during the guarantee period.
Description of the device
1. Display
2. On/off button
3. Program selection keys
4. Start and program reset button
5. Connection socket of the quantum therapy remote console
6. Power supply connection socket
7. Quantum therapy remote console
WRINKLE SMOOTHING
No 1
00:50:00
6
14
7
Connect the quantum therapy remote console to the device.
Insert the batteries to the battery compartment according to the
polarity. The device will turn on and perform the operability self-
testing. The caption on the device display and the sound signal will
notify of the device operable condition.
When operating the device with the remote quantum attachment,
connect the power supply unit first to the device and then to the
socket.
Attention!
the audio signal when the battery is discharged.
In this situation, the caption "LOW BATTERY" will appear on the
display and the device will turn off. To continue operating the device,
replace the batteries or connect the network adaptor.
To replace the batteries, open the battery compartment on the rear
side of the housing by pressing the cover latch. When replacing the
4
batteries, the programs recorded in the device will be kept.
3
2
1
5
Operating the device
The device is equipped with the inbuilt sensor generating
15