Maintenance; Precautions For Maintenance - TCL breeva A3 Benutzerhandbuch

Maintenance

Precautions for maintenance:

Before maintenance, you must unplug the unit to disconnect the power supply.
Composite Filter
Use a vacuum cleaner to maintain
the filter.
The filter is not washable.
Please clean the filter once every
two weeks.
Clean the filter with a vacuum
cleaner
The filter material is easy to damage,
so be gentle while cleaning to avoid
damage.
The filter is a consumable product,
which is not covered by the product
warranty. Please maintain and use it
properly to avoid damage.
Brush
nozzle or
gap nozzle
Reminder
Do not operate when the filter is
removed. (It loses the function of dust
removal and deodorization, and the
inhaled dust may cause the sensor in
the machine to malfunction.)
During maintenance, do not arbitrarily
place the removed accessories. (It is
possible to trip over or damage the
accessories, and children could get
injured by playing with them.)
Wipe the body and operation panel with a soft
cloth.
Please do not wipe with a hard cloth, otherwise it
will cause surface damage.
Please use a dry cloth to clean the power cord to
avoid potential injury (electrical shock).
Please use neutral detergent when cleaning.
Never use decontamination powder, alkaline
detergent, thinner, bleach, alcohol or gasoline to
clean the body.
Reference time for filter replacement
Composite Filter
Conditions: The product use time is 12 hours/day, and
the use environment is normal.
If the environmental pollution is high, please shorten
the replacement time as appropriate.
Depending on the actual use environment and
method of use, the replacement cycle of the filter
may change. If you believe your air purifier is not
performing good because of a heavy usage
environment, please replace the filter.
After replacing the filter, press and hold the light
button for 3 seconds, the buzzer will sound once,
the panel indicator will turn from red to white,
and the reset is complete.
Please dispose of the used filter as non-combus-
tible garbage.
- 12 -
Replacement cycle
When the panel indicator is
flashing (it needs to be replaced
every 6 months after use)