Introduction; Intentions Of Use; Functions Of Device - Sunoptic Technologies Pro300 Bedienungsanleitung

1.

INTRODUCTION

The Pro300 Xenon Light Source is a state-of-the-art medical illumination device with important features
like:
•
5600K nominal color temperature.
•
Quiet operation.
•
Compact and lightweight.
•
Four-port turret accepting ACMI, Olympus, Storz, and Wolf light guides
•
Auto-shutter feature of turret.
•
Intuitive interface and digital dimming.
•
Easy lamp replacement.
This document explains how to properly install, setup, use, clean, and maintain the device.

1.1 Intentions of Use

The intended use of this device is to provide light for fiberoptic cables and instruments – providing
light for instrumentation via fiberoptic cables for use in surgical fields.
The xenon illuminator is intended to be used in a controlled operating room environment by
qualified medical personnel. The illuminator is provided non-sterile and is not intended to be
sterilized. The system has no limits to the frequency or duration of normal use and an expected,
but not limited, three-year service life.
The illuminator is not intended to be used for monitoring, diagnostic, or other life support functions.
There are no restrictions on patient population. This device does not sustain nor support life. The
device is not intended to compensate for injury, handicap, replacement or modification of anatomy,
or control of conception. No special intervention is necessary in the event of device failure. As such,
this device has no essential performance as defined by IEC 60601-1, and should this device fail to
operate, a suitable backup should be available for any procedure where it may be used.
There are no contraindications.

1.2 Functions of Device

The illuminator is typically used with a fiberoptic light guide that connects to a light port located on
the front panel. Light intensity is controlled via pushbuttons located on the front panel of the console.
Intensity level, lamp runtime, and other information is displayed via LCD screen located on front
panel.
LIT-263 Sunoptic Technologies
Rev. A
®
Page 3 of 134
(English)