Operating Instructions; Product Description; Assembly And Installation; Safety Instructions - NUKI SMART LOCK 3.0 Pro Installationsanleitung

Operating Instructions

Product description

The Nuki Smart Lock 3.0 Pro motorises
existing door locks and creates a digital
access system when combined with a
smartphone.
The electronic door lock is placed on the
inside of the door on the existing cylinder
with the key inserted. The key is turned by
the Nuki Smart Lock 3.0 Pro motor, but can
also be turned manually using the knob.
The integrated Wi-Fi module can also
establish a connection between the Smart
Lock 3.0 Pro and other Nuki actuators
via the internet. This means Nuki locking
systems can also be accessed online and/or
a connection to other Smart Home products
can be established.
The Nuki Power Pack is a rechargeable
battery pack for the Nuki Smart Lock. The
Nuki Power Pack is charged via a 5 V USB
type C connection. The Power Pack can also
remain permanently connected to the USB
power supply and be recharged this way.
Proper use
We recommend only mounting the Nuki
Smart Lock 3.0 Pro onto lock cylinders with
an emergency function. If the key is inserted
from the inside, these can also be locked and
unlocked from the outside using another key.
Operating temperature: 10–40°C, maximum
humidity 95%, non-condensing. The device
is only suitable for use in dry interior spaces
and must not be installed on fire doors,
escape doors or other doors with special
requirements for door lock drives.
The Wi-Fi connection may fail due to
technical malfunctions, meaning control
functions may be temporarily unavailable
while you're on the move. Any other use
is deemed improper and shall result in an
exclusion of warranty and liability.
Only certified 5V USB-C connections may be
used when charging the Nuki Power Pack or
using it with a permanent power supply. The
charger technology is already included in the
Nuki Power Pack.

Assembly and installation

Information on assembly can be found in the
enclosed installation instructions.
To use the adhesive pad (B), the surface
must be cleaned (with residue-free cleaning
agents) and free of any grease.
If your surface is made of materials other
than metal or similarly smooth surfaces,
please contact our customer service.

Safety instructions

The following safety and hazard
instructions not only serve to protect
the device, they also prevent personal
injury. Please read through the instructions
carefully:
• The Nuki Smart Lock 3.0 Pro may fail due
to technical malfunctions and thus be
unable to open the door. Always carry the
key to the lock with you or leave it in an
accessible place so that the door can be
opened manually in the event of an error.
• Improper use of the device might result in
damage.
• Do not expose the device to extreme heat
or cold, direct sunlight, open flames or
other extreme conditions.
EN
11