Zelmer ZGK6800 Benutzerhandbuch Seite 13

EN
HOW TO PLACE AND REMOVE
ATTACHMENTS
A detachable blade system enables you to quickly change from blade for full
grooming to detail trimming blade around a moustache, goatee, or anywhere to
define the hair line. To remove the attachments, simply pull top edge of blade
away from the body unit. To attach, align the back tab of the attachment head to
the cavity on the inner edge of trimmer unit and push down on top of blade.
T-BLADE (Fig.1)
For uniform cutting, allow the trimmer to cut its way through the hair. Do not force
it through at a faster rate.
Select the desired guide combs 3/6/9/12/15/18/18mm. Start by combing the hair
so it falls into its natural direction.
Place the largest guide comb onto your trimmer and start by trimming the sides
from the bottom upwards. Hold the trimmer lightly against the hair, with teeth of
the guide comb pointing up but flat against the head. Slowly lift the trimmer up
and outward through the hair, cutting only a small amount at a time. Repeat
around sides and back of head.
To trim your beard/moustache hold the groomer with the cutting blade facing you.
Start with edge of beard/moustache line, and with the cutting blades resting
lightly against your skin, use slow movements to create a beard/moustache line.
PRECISION TRIMMER (Fig.7)
One adjustable comb for precision trimmer
Select the desired length on the adjustable comb 3-4-5-6mm.
Hold the groomer with the cutting blade facing you.
Start with edge of beard/moustache line, and with the cutting blades resting
lightly against your skin, use slow movements to create a beard/moustache line.
DESIGN TRIMMER (Fig.8)
Use the design trimmer to create fine lines and contours around your facial style,
close to the skin.
Hold the design trimming head perpendicular to the skin and move the trimming
head upwards or downwards with gentle pressure.