General Information; Operating Conditions - Sygonix 2481642 Bedienungsanleitung

Operating instructions
Soap dispenser with sensor
Item no. 2481642
1 Intended use
The product is a battery-operated automatic soap dispenser for use with disinfectants. This
product is intended for indoor use only. Do not use it outdoors. Contact with moisture must be
avoided under all circumstances.
Using the product for purposes other than those described above may damage the product.
Improper use can cause a short circuit, fire or other hazards.
This product complies with statutory, national and European regulations. For safety and
approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product
available to third parties only together with the operating instructions.
All company and product names contained herein are trademarks of their respective owners.
All rights reserved.
2 Delivery content
Soap dispenser
3 screws and dowels
3 Product updates
Download the latest product catalogue at
Follow the instructions on the website.
4 Symbols used in this document
This symbol indicates hazards that may cause personal injury. Read the information
carefully.
5 Safety Insructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.

5.1 General information

This product is not a toy. Keep it out of the reach of children and pets.
Do not leave packaging material lying around carelessly. It may become a dangerous
plaything for children.
Should you have any questions or concerns after reading this document, please contact
our technical support or a professional technician.
Maintenance, modifications and repairs must be carried out by a technician or a specialist
repair centre.
5.2 Handling
Please handle the product carefully. Impact, shocks or a fall even from a low height can
damage the product.

5.3 Operating conditions

Do not place the product under any mechanical stress.
Protect the product from extreme temperatures, strong jolts, flammable gases, vapours,
and solvents.
The product must be protected from high humidity and dampness.
The product must not be exposed to direct sunlight.
5.4 Operation
Consult an expert when in doubt about the operation, safety or connection of the device.
If it is no longer possible to operate the product safely, stop using it and prevent
unauthorised use. DO NOT attempt to repair the product yourself. Safe operation can no
longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stress.
5.5 (Rechargeable) batteries
Correct polarity must be observed when inserting the batteries.
The (rechargeable) batteries should be removed from the device if it is not used for a long
period of time to avoid damage through leaking. Leaking or damaged batteries may cause
acid burns if they come into contact with your skin. therefore use suitable protective gloves
to handle corrupted (rechargeable) batteries.
Cover release key
Operating instructions
www.conrad.com/downloads or scan the QR code.
(Rechargeable) batteries must be kept out of reach of children. Do not leave (rechargeable)
batteries lying around, as there is risk, that children or pets swallow them.
All (rechargeable) batteries should be replaced at the same time. Mixing old and new
(rechargeable) batteries in the device can lead to (rechargeable) battery leakage and
device damage.
Batteries must not be dismantled, short-circuited or thrown into open flames. Never
recharge non-rechargeable batteries. There is a danger of explosion!
5.6 Installation
When wall mounting, make sure there are no cables, wires, or pipes located underneath
the surface.
Inadvertently puncturing electric cables can cause life-threatening electric shock!
6 Product overview
1 Container closure 5 Nozzle
2 Lid 6 ON/OFF switch
3 Product container 7 Battery compartment
cover
4 LED indicator
8 Mounting plate
9 Sensor