Operating Test - DAITEM 230-21X Technische Beschreibung

8. Operating test

Connect the lithium battery pack.
8.1 Testing the power supply
Press the test button once to check that
the battery is working properly. The LED
indicator lamp should light up red.
8.2 Testing the radio links
The control panel should be in installation
mode to conduct this test.
Press & hold the test button (approximately
3 sec.) to send a "test" message.
(For more details, see the chapter on
Checking radio links described in the
manual supplied with the alarm control
panel).
IMPORTANT
• For a technical detector:
"beep, test, technical
154
detector X"
Testing the loop
"beep, test, detector X, group Y,
or
Press
& hold
the key
(approximately
3 sec.) until the
control panel responds
• For a fire detector:
immediate (or delayed
or combined)"
"beep, remote control X"
"beep, test, fire
detector X"