FISCHER FIS DB S Pro Bedienungsanleitung Seite 11

The injection mortars, sealants or adhesives
used may be dangerous. For this reason, you
should always carefully read any instructions
on the container or other information provided
by the manufacturer about the material to be
used. Do not use materials without knowing
what risks they entail.
Do not use any solvent, acidic or other
abrasive cleaning agents.
Put the unit down safely.
Retract the toothed rod only with the button (2)
pressed.
Reducing dust exposure:
Warning: Some dust created by power
sanding, sawing, grinding, drilling, and
other construction activities contains
chemicals known to cause cancer, birth
defects or other reproductive harm.
Some examples of these chemicals are:
→ Lead from lead-based paints,
→ Crystalline silica from bricks, cement
and other masonry products,
→ Arsenic and chromium from chemically
treated lumber.
Your risk from these exposures varies, de-
pending on how often you do this type of work.
To reduce your exposure to these chemicals:
work in a well ventilated area, and work with
approved safety equipment, such as those
dust masks that are specially designed to filter
out microscopic particles.
This also applies to dust from other materials
such as some timber types (like oak or beech
dust), metals, asbestos. Other known diseases
are e.g. allergic reactions, respiratory diseas-
es. Do not let dust enter the body.
Observe the relevant guidelines and national
regulations for your material, staff, application
and place of application (e.g. occupational
health and safety regulations, disposal).
Collect the particles generated at the source,
avoid deposits in the surrounding area.
Use suitable accessories for special work. In
this way, fewer particles enter the environment
in an uncontrolled manner.
Use a suitable extraction unit.
Reduce dust exposure with the following
measures:
→ Do not direct the escaping particles and
the exhaust air stream at yourself or nearby
persons or on dust deposits.
→ Use an extraction unit and/or air purifiers.
→ Ensure good ventilation of the workplace
and keep clean using a vacuum cleaner.
Sweeping or blowing stirs up dust.
Vacuum or wash the protective clothing.
Do not blow, beat or brush.
Transport of li-ion battery packs:
The shipping of li-ion battery pack is subject
to laws related to the carriage of hazardous
goods (UN 3480 and UN 3481). Inform yourself
of the currently valid specifications when ship-
ping li-ion battery packs. If necessary, consult
your freight forwarder.
Only send the battery pack if the housing is
intact and no fluid is leaking. Remove the
battery pack from the machine for sending.
Prevent the contacts from short-circuiting
(e.g. by protecting them with adhesive tape).
EN
11