Wireless Network Connection - Yealink CP965 Teams Edition Schnellstartanleitung

Assembling the Phone
Connect the power and
wired network.
Note: The IP phone should be used with Yealink original PoE adapter (54V/0.56A) only. The use of the
third-party PoE adapter may cause the damage to the phone.
The cable should be replaced at once if its skin is broken.

Wireless Network Connection

1. Tap the account avatar in the top-right corner of the interface, and then tap Settings->Device
settings->Wi-Fi.
2. Turn Wi-Fi on.
The phone will automatically search for available wireless networks in your area.
3. Tap an available wireless network to connect.
4. If the network is secure, enter its password in the Password field, and then tap CONNECT.
2
7.5 m
2 m
A
Refer to Wireless Network
Connection mentioned below
for more information.
7.5 m
Wi-Fi
Connect the power and
B
wireless network.