Hama 00176570 Bedienungsanleitung Seite 4

7.1 Integrating devices into the Hama Smart
Home (Solution) app
• Press and hold the pairing button for around 5
seconds. The LED starts to flash red quickly. If it
flashes slowly, press and hold the button again for
approx. 5 seconds.
• Open the app and sign in.
• Press the + in the top right-hand corner to add
a new device.
Mein Zu-
hause
• In the list, select the socket strip, sockets or
sockets + consumption meter.
• Next enter your WiFi password and confirm
with "NEXT".
• Now confirm that the socket / socket strip's LED
is flashing quickly by ticking "Next step" and
clicking on "Next".
• Your socket / socket strip is now connected.
Gerät hinzufügen
4
• Once the connection is successful, the LED stops
flashing quickly and the app confirms that your
sensor is connected. You can now assign it a
different name if you wish.
Erfolgreich hinzugefügt
• Click Finish to end the process.
• You can now configure the device.
Note
A detailed description of the
Hama Smart Home (Solution) App
and its full scope of functions can be found in our
App Guide at:
www.hama.com ð Article Number ð Downloads
ð App Operating Instructions
Erledigt