Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ASSEMBLY INSTRUCTION
COMPONENTS (pict. 1):
for the components of the base make reference to pict. 2
A
sunshade "A"
B
pole of the sunshade "B"
C
base tube "C"
D
handle "D"
E
bag of hardware "E"
F
component "F" of the base
F'
component "F'" of the base
G
component "G" of the base
H
component "H" of the base
I
bag of hardware for the base "I"
K
orientation stick
ALUMINIUM BASE ASSEMBLY (pict. 2)
Take out the content of the hardware bag (I) and assemble the base as shown in pict. 2
∆ CAUTION: tighten the base bolts well
Place floor slabs in the appropriate places of the base
∆ CAUTION: ballast the base with a weight of at least 130 KG (≈286 lbs)
FRAME ASSEMBLY (pict. 3 - 6)
1.
(pict. 3) slip the pole (B) onto the pole of the sunshade (A) taking care that the 2 coloured marks are on the same
side. Block the two parts with the bolts (R)
2.
(pict. 4) insert the pole of the sunshade (A) in the base tube (C)
IMPORTANT:
the pole of the sunshade (A) must be pushed all the way into the square housing of the orientation ring (O)
3.
(pict. 5) insert the handwheel (T) into the threaded hole of the pole of the sunshade (A)
4.
Insert the slot of the winch (U) onto the hand wheel screw (T). Then insert the winch pin (b) of the winch (U)
into the hole (b') of the pole of the sunshade (A) and screw the handwheel (T) well in
5.
Insert the handle (D) into the appropriate hole of the winch (U)
6.
(pict. 6) fix the rib (M) to the pin (N) with the appropriate screw
Your sunshade GARDA TILT is now ready for use.
OPENING THE SUNSHADE (pict. 7 - 9)
IMPORTANT:
Before opening the sunshade remove the tie string and slightly open it by pulling the ribs with your hands
To open the sunshade, gently turn the handle (D) of the winch (U) clockwise, taking care not to force the
mechanism.
(pict. 7 & 9) if there is furniture near the sunshade which could hinder the opening, proceed in the following
way:
1.
(pict. 8) insert the pin of the handle (Q) into the hole made in the pole of the sunshade (A) and open the
sunshade turning the handle (D) clockwise
2.
when the ribs are above the furniture (for reference see picture 9) extract the handle (Q) from the hole made in
the pole of the sunshade (A)
3.
complete the opening of the sunshade
ROTATION OF THE SUNSHADE AROUND THE BASE (pict. 10)
(pict. 10) the frame rotates 360º around the base and can be fixed in 20 different positions by inserting the pin
(S) into the orientation ring (O).
INCLINATION OF THE SUNSHADE (pict. 11 – 12)
make this operation starting from the open sunshade
1.
(pict. 11) rotate the handle (D) counter clockwise and at the same time pull the handle (Q) downwards. In this
way the sliding carrier (L) lowers and the sunshade inclinates.
2.
(pict. 12) when the desired inclination has been reached rotate the handwheel (P) clockwise to lock the sliding
carrier (L). If needed, tension the cover by turning the handle (D) clockwise
3.
to bring the sunshade in horizontal position, unlock the sliding carrier (L) by turning the handwheel (P) counter
clockwise and turning the handle (D) clockwise.
\\Fim-server\documenti\Istruzioni Articoli + Schede Tecniche\ISTRUZIONI VARIE TUTTI GLI ARTICOLI\GARDA\GARDA TILT 2011\GARDA TILT -GB-
20111007.doc 2 / 3
All manuals and user guides at all-guides.com
HOW TO USE YOUR SUNSHADE
Werbung
Inhaltsverzeichnis
