Herunterladen Inhalt Inhalt Diese Seite drucken

Pl Ea S E Ta Ke Note O F T H E F O Llow I Ng Be F O R E In Stal L Ati On - VALLONE invitato dx Technische Informationen

Inhaltsverzeichnis

Werbung

invitato dx
!
HI N W E I S E Z U R MO N TAG E
N OT E S O N A S S E MB LY
VOR DE R I N STA L LATI O N IS T F O LG E N DE S Z U B EAC H T EN:
Die Installation darf nur von geschultem Fachpersonal unter Be-
rücksichtigung der Montageanleitung und den allgemein an-
erkannten Regeln der Technik (a.a.R.d.T.) durchgeführt werden.
Nach erfolgter Installation ist die Montageanleitung dem Endan-
wender auszuhändigen.
Um eine korrekte Funktion des Produktes zu gewährleisten,
müssen die Anweisungen und Schritte der Montageanleitung be-
folgt werden. Waschbecken sind so zu installieren wie in der
Montageanleitungen angegeben.
Offensichtliche Schäden am Produkt sind vor der Installation zu
reklamieren. Nach der Installation kann die Reklamation offensicht-
licher Schäden nicht mehr berücksichtigt werden.
Scharfkantiges Werkzeug sowie schmutziges Arbeitsmaterial
sollten nicht auf das Produkt abgelegt werden.

PL EA S E TA KE NOTE O F T H E F O LLOW I NG BE F O R E IN STAL L ATI ON:

Installation may only be carried out by trained technical staff
and in compliance with the installation instructions and the
generally recognised rules of technology (a.a.R.d.T.). After suc-
cessful installation, the installation instructions must be handed
over to the end user.
To ensure correct functioning of the product, the instructions
and steps in the installation instructions must be observed. Sink
must be installed as specified in the installation instructions.
Obvious damage to the product must be reported before instal
lation. Complaints about obvious damage can no longer be
considered after installation. Before installation, make sure that
all parts of the scope of delivery are included and that the
product is complete.
V.2022.2.1
Um eine Beschädigung der Oberfläche zu vermeiden, sollte die
Verpackung vorsichtig geöffnet werden. Von der Verwendung von
Cuttern oder anderem scharfkantigem Werkzeug ist abzusehen.
Die einzelnen Komponenten des Produktes oder das Produkt
selbst dürfen nicht verändert oder modifiziert werden. Wir über-
nehmen keine Gewährleistung für Modifikationen und weisen
darauf hin, dass auch die gesetzliche Gewährleistung durch eine
Modifikation des Produktes eingeschränkt oder vollständig auf
gehoben werden kann.
Die Montageanleitung ist vom Endanwender aufzubewahren.
Sharp-edged tools, as well as dirty work material should not be
placed on the product.
To avoid damaging the surface, the packaging should be opened
carefully. Avoid the use of cutters or other sharp-edged tools.
The individual components of the product or the product itself
must not be changed or modified. Modifications of the product
are not covered by any warranty and the legal warranty may also
be limited or completely voided due to a modification.
The installation instructions must be kept by the end user.
3

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis