Create PATIO HEATER Bedienungsanleitung Seite 9

4. Route the power cord through the base, bottom post, middle post, and top post. Connect
the plug of the power cord to the socket on the heater head.
5. Push heater head onto upper tube, align threads and tighten screw.
6. Fix the power cord on the base with 4*12 screws.
7. Set the heater on the ground. Drill three holes in the ground, fix the heater with three
wedge bolts in the ground by tightening the bolts with a wrench.
E NGLI SH
9