Temperature Selection - De Dietrich DLZ1854I Bedienungsanleitung

RAPID PROGRAMMES / STAIN
LEVEL button
This button allows you to choose between
two different options, depending on the
selected programme:
- RAPID
The button becomes
you select the Flash (14-30-44 Min.)
programme on the knob and allows you to
select one of three durations indicated.
- STAIN LEVEL button
Once the programme has been selected

the wash time set for that programme will
be automatically shown.
This option allows you to choose between

3 levels of wash intensity modifying the
length of the programme, depending on
how much the fabrics are soiled (can only
be used on some programmes as shown
in the table of programmes).
OPTIONS button
This button allows you to choose between
three different options:
- PREWASHING
This option allows you to make a prewash

and it is particularly useful for heavily
soiled loads (can be used only on some
programmes as shown in the table of
programmes).
We recommend you use only 20% of the

recommended quantities shown on the
detergent pack.
- EXTRA RINSE
This option allows you to add one rinse at

the end of the washing cycle and is useful
for people with delicate and sensitive
skin, for which a small amount of
detergent residue can cause irritations or
allergies.
It is advisable to also use this function for

the children clothes and for the washing
of heavily soiled items, which requires a
lot of detergent to be used, or for the
washing of toweling items whose fibres
mostly have the tendency to hold the
detergent.
- HYGIENE
active when
Activated
temperature.
cleaning of your clothes by maintaining the
same temperature for the whole wash.

TEMPERATURE SELECTION

button
This button allows you to change the

temperature of the wash cycles.
It is not possible to raise the temperature

over the maximum allowed for the
programme, in order to protect the
fabrics.
If you want carry out a cold wash all the

indicators must be off.
SPIN SPEED button
By pressing this button, it is possible to

reduce the maximum speed, and if you
wish, the spin cycle can be cancelled.
If the label does not indicate specific

information, it is possible to use the
maximum spin expected in the program.
To prevent damage to the fabrics, it is
not possible to increase the speed
over the maximum allowed for the
programme.
To reactivate the spin cycle press the

button until you reach the spin speed you
would like to set.
It is possible to modify the spin speed

without pausing the machine.
83
when you set
This option allows
60°C of
deep