Product Overview - Remote Control Display - Wilfa COOL 9 CONNECTED Anleitung

Health
PRODUCT OVERVIEW – REMOTE CONTROL DISPLAY
Set fan speed
Operation mode
Auto mode
Cool mode
Dry mode
Fan mode
Heat mode
Sleep mode
Up & down swing
NOTE:
This is a general use remote controller, and some functions, as described are
non-functioning.
USE
1 ON/OFF button
Press this button to turn on the unit. Press this button again to turn off the unit.
2 Mode button
Press this button and the mode will circulate according to below sequence:
Auto -> Cool -> Dry-> Fan-> Heat
• Auto: During auto the unit will automatically adjust the settings. The set
temperature cannot be changed.
• Cool: Under this mode, air conditioner operates under cooling mode. Cooling
indicator will be on. Press "Fan Speed" button to adjust the fan speed.
• Dry: Under this mode, the unit runs in low fan speed for dehumidification and
the corresponding indicator is on. The fan speed cannot be adjusted.
• Fan: Under this mode, air conditioner will not cool or heat, only blow wind. Fan
indicator will be on. Press "Fan Speed" button to adjust the fan speed.
• Heat: Not available
WiFi
AIR CONDITIONER · COOL 9 CONNECTED
Temperature display type
Set temp.
Outdoor ambient temp.
Turbo mode
FAN AUTO
17
Indoor ambient temp.
Send signal
OPER
Child lock
Health function
Ventilation operation
8°C heating function
Set temperature
Light function
I feel function
TIMER ON /TIMER OFF
Set time
EN