Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation instructions
Operation modes
Selecting mode
Press
button once by once
MODE
The operation modes changed in sequence:
Result :
PRESS
Heating mode is NOT available for cooling only air conditioner.
FAN mode
Press
button once by once
FAN SPEED
Result :
The fan speed is changed in sequence:
PRESS
FAN SPEED
At "FAN ONLY" mode, the "AUTO" is not available.
At "DRY" mode, Fan speed is set at "AUTO" automatically, "FAN" button
is ineffective in this case.
Setting temperature
Press
button once
TEMP.
Result :
Raise temperature setting by 1℃
Press
button once
TEMP.
Result :
Lower temperature setting by 1℃
Turning on
Press
button .
Result :
T he RUN indicator of the indoor unit lights up.
SWING, SMART, TIMER ON, TIMER OFF, CLOCK, 8°HEAT,SLEEP and SUPER operation modes will be specified in the following
pages.
Changing modes during operation, sometimes the unit does not response at once. Wait 3 minutes.
During heating operation, air flow is not discharged at the beginning. After 2－5 minutes, the air flow will be discharged
until temperature of indoor heat exchanger rises.
Wait 3 minutes before restarting the appliance.
All manuals and user guides at all-guides.com
MODE
COOLING
Higher
High
Auto
DRY
FAN ONLY
Low
Medium
Range of available set temperature
*HEATING, COOLING
DRY
FAN ONLY
*Note: Heating mode is NOT available for cooling only models.
*Note:
At "Dry" mode, a decrease or rise of up to 7℃ can be set
with
Remote controller
3
HEATING
OFF
Lower
OFF
16℃~30℃
-7 ~ 7
unable to set
if you still feel uncomfortable.
Werbung
Inhaltsverzeichnis
