Sleep Mode - Hisense L1-04 Bedienungsanleitung

Operation instructions

SLEEP mode

SLEEP mode can be set in COOLING ,HEATING
This function gives you a more comfortable environment for sleep.
The appliance will stop operation automatically after operating for 8 hours.
Fan speed is automatically set at low speed.
How to set SLEEP mode ?
SLEEP
Each time button is pressed.
The operation mode is changed in sequence:
Result :
SLEEP 1
SLEEP mode 1:
Set temperature will rise by 2
then keeps steady.
Set temperature will decrease by 2℃ at most if the appliance operates in heating mode for 2 hours
constantly, then keeps steady.
SLEEP mode 2:
Set temperature will rise by 2
by 1℃ after 6 hours, then decrease by 1℃ after 7 hours.
Set temperature will decrease by 2
by 1℃ after 6 hours, then rise by 1℃ after 7 hours.
SLEEP mode 3:
Set temperature will rise by 1
hours, then decrease by 2
℃
decrease by 1 after 7 hours.
Set temperature will decrease by 2
℃
2 after 2 hours, then rise by 2
SLEEP mode 4:
Set temperature will keeps steady.
Note: Press SUPER ,SMART, MODE or FAN button cancel SLEEP mode.
Note: By pressing "Sleeping mode" four times, or selecting other modes like SUPER, SMART, OR FAN,
you could cancel the sleeping function of those units without four sleeping curves.
Note: Heating is NOT available for cooling only air conditioner.
All manuals and user guides at all-guides.com
or DRYING
SLEEP 2 SLEEP 3 SLEEP 4
℃ at most
if the appliance operates in cooling
℃
if the appliance operates in cooling
℃
if the appliance operates in heating mode for 2 hours constantly, rise
℃
if the appliance operates in cooling
℃
after 6 hours,
℃
if the appliance operates in heating mode for 1 hour , decrease by
℃
after 6 hours, rise by 2
9
mode.
QUIT SLEEP MODE
mode for 2 hours constantly,
mode for 2 hours constantly, decrease
mode for 1 hour , rise by 2
℃
after 7 hours.
ON
℃
after 2